An orange peel ceiling is a texture technique that creates soft and lightly bumpy surfaces. This technique is trendy because of its attractive appearance and easy application. Texturing a ceiling can have a variety of benefits. It can hide flaws or control sound levels. Although professional help is best, you can apply orange peel texture yourself. You will probably need to rent some equipment. Take down as many ceiling fixtures and fittings as you can. Painter's tape can be used to cover or attach any ceiling fixtures that are not possible to remove. These items can be protected with painter's plastic. Home Depot warns that texture sprayers can be imprecise, so covering anything you don't wish to spray is crucial. If necessary, wash and repair the ceiling. Cracks may need to be filled. Use a sanding stick to sand the ceiling. Use ceiling paint to prime the ceiling. Use a brush to paint around the corners and edges for large areas. A roller is used for larger sizes. An extension handle can make it easier to use your roller. It will be easier to spot missed areas by using a light-tinted primer. Allow the primer to dry. Ceiling texture spray can be made by mixing drywall compounds. Spray cans are also available for ceiling texture. This is best if you need to create texture in a small area. Use a drill attachment with a paddle or ribbon attachment to mix your drywall compound. You can use both pre-mixed and powdered drywall compounds. You will need approximately five to thirty parts water for the powdered variety. Pre-mixed types can be added to water until they reach the desired consistency. The consistency of the drywall compound should look like pancake batter. DIY Painting Tips recommends using the smallest nozzle to achieve the smallest spray size. Your hopper gun should be loaded with drywall compound. It would help if you only loaded the gun and hopper with as much weight as you are comfortable holding. It is okay not to fill the hopper fully. Tipping your gun back and aiming at the ceiling with less compound in your hopper will be easier. To make your job easier, you might need someone to hold the gun while you load it. Attach the hopper gun and air compressor. Attach the compressor to the gun using a hose and small nuts. For more information, refer to the instructions for buying a hopper gun. You can also ask the store associate for additional instructions if you rent one. The compressor can be adjusted. An orange peel needs to be pressured between 15 and 45 PSI. The opening is approximately 3/8 inches. The gun’s valve controls the air pressure, while the dial controls the opening at its front. Higher air pressure will produce a more delicate spray, but it will be more challenging to manage. The heavier spray will conceal more flaws. Larger openings produce more texture, while smaller ones create more delicate textures. To see how the surface looks, spray it against a piece of cardboard, drywall, or another material. You can adjust it to your liking. The orange peel should be applied to the ceiling. Keep the gun at least 3-4 feet from the ceiling. A stepladder may be necessary, depending on the height of your ceiling. It would help if you kept moving the gun continuously. You can move the gun in either random patterns or lines. As long as you cover your ceiling evenly and consistently, both are acceptable. It would help if you were less concerned about the texture than being too thick. It is easier to add texture than it is to remove it. You can keep the air moving by shaking the hopper as you go. Let the texture dry. After the primer drIES, paint over the texture with primer. Then apply ceiling paint. It is possible to utilize more than one coat. After the paint has dried, remove any protective tape, tape, or cloths. Then, put the furniture back into the room. The texture on your ceiling and walls can hide imperfections and seams and add personality and drama to your decor. You can choose from the texture options, including a bumpy orange peel splatter wall or a popcorn ceiling finish. You can either use a pre-mixed product or add water to make dry mix products. To apply texture to walls, you can use a roller. You can create patterns using a trowel, grout spreader, sponge, or crumpled paper. To create a popcorn ceiling, use a hopper gun. To make it even easier, you can use a hopper gun to create a popcorn ceiling. Sprays in an aerosol can be used to spray orange peel or other splatter-like designs. Flatten the peaks using a mud knife to create a unique look. You can also use aerosols to repair popcorn ceiling textures. For tips on painting textured walls, see our guide: How to Paint Textured Surfaces. Orange peel texture conceals imperfections like screw pops and bulging joints in drywall ceilings. The orange peel texture is applied using a ceiling texture hopper. The result is a ceiling that has slightly raised bumps, similar to an orange’s outer skin. The ceiling texture is often created using Gypsum plaster and a little water. You can purchase plaster at hardware stores and paint shops. It is also known as joint compound or drywall mud. Remove all furniture and decor from the room. Tape the flooring with painter’s tape. Plastic should not have wrinkles. The same plastic should be stretched over all walls and doors in the room. Use painter’s tape to attach it to the ceiling edge. Apply a coat of latex primer to the ceiling. Use a flat roller with a low nap. Allow the primer to dry for 24 hours before applying a single layer. Primer ensures that the joint compound adheres evenly to the drywall surface. Put joint compound in your drywall hopper. Add a little water to ensure that plaster flows smoothly through the spray gun’s nozzle. Lightly spray the ceiling with the hopper’s gun, moving the gun in one direction. Allow the texture to dry for approximately two hours. Spray another coat of orange peel texture on the ceiling. However, spray in the opposite direction. If the first layer of texture was applied horizontally, then the second coat should apply vertically. The second coat should dry for 24 hours. Use a rough nap roll to apply two to three pieces of latex paint. Orange peel texture can be sprayed on walls and ceilings to create a similar texture to orange peel. There are many reasons why an orange peel should be sprayed on walls and ceilings. Many people think that it is too complicated and won’t look nice. Spraying orange peel texture is very easy. All you need are the right tools, some instruction, and a lot of practice. Although textured walls are often considered outdated by many, there are a few reasons why you might want to spray orange peel texture on your ceilings or walls. Orange peel walls last longer than flat walls. Orange peel walls are more durable than flat walls because they can withstand minor dents, dings, and scratches. Orange peel is a popular choice for commercial and rental properties. Orange peel can hide flaws in ceilings and walls very well. It can be challenging to get walls smoothened if you have a rental property or a home in poor condition. This can cost you money and new sheetrock. An orange peel texture can be applied quickly to make walls look great and inexpensive. Preparing the area where you will be working is the first step in any project. Spraying a splatter texture requires removing all outlet covers and furniture from the room. Cover the switches with tape, then cover them with tape. Finally, use painter’s glue to attach the lights. Once everything has been removed from the space and all lights and outlets have been covered, you will need to close off the area from the rest. It could be as easy as closing all doors and taping up sheets of painter’s plastic to cover any openings. Bare drywall mud is used to create an orange peel texture. Once the water has been mixed in, it will resemble pancake batter. Next, get your mixing tool and paddle. Mix the mud with water slowly while mixing it in. You do not wish the mixture to be too wet. You’re ready to go once the mixture reaches the consistency of pancake batter. We offer the above services at the following locations within Boca Raton:
If you are located in Palm Beach County and you don’t see your city/area listed above, don’t worry! We cover all of Palm Beach County. Fill out the contact form above or CLICK HERE and send us a message. We’ll get back to you asap!
Orange Peel Ceiling
Contact Us
How to apply orange peel texture to ceilings
Cover fixtures with tape
Fix any ceiling cracks
Place the ceiling in its prime
Make sure you have a drywall compound.
Load hopper gun
Attach hopper to the air compressor
Practice and adjust
Spray the texture
Apply paint to the texture
Prepare the area to be textured.
Mix your Mud to Get the Right Consistency
Fill a 5-gallon bucket with plus three drywall mud.
Locations We Serve
