Get Your FREE Popcorn Removal Quote for Boca Raton Residents!
Contact Us
We provide all popcorn removal and painting services at the company. Our company has many experts who have years of experience in all texture fittings and removal. Contact us today to get a free quote.
Popcorn Ceiling Removal
Boca Raton Popcorn Ceiling Removal & Drywall Repair Group should be consulted before you embark on any renovation, remodel, demolition, or other projects. Businesses must obtain an asbestos inspection certification before they can start any construction.
When removing popcorn, take out any cover-up wiring or light fixtures. Put plastic sheeting on your walls and floors to avoid a big mess. Use tape to secure these sheets. Only fill the tank sprayer with water. It would help if you didn’t overfill it with water. Pump the pressure on the tank sprayer until the nozzle is pointed towards the ceiling. Wear safety glasses to prevent popcorn and water from splashing into your eyes. Do not be a rebel.
Close
Residential Popcorn Ceiling Removal
Use a breathing mask. You should take the details of your breathing mask very seriously. Once you have softened your popcorn material, you can use a putty blade to remove it. Leave the water to sit longer if you cannot get the material down. Spray more water on the ceiling. It doesn’t make it any easier to remove. Be patient. Allow the fabric to soak for a few more minutes until it becomes mushy.
You shouldn’t feel guilty about leaving small pieces of popcorn. Every piece of popcorn must be thrown away. They can be re-soaked and scraped off if they dry. Allow the ceiling to dry completely after all popcorn has been removed. Once the popcorn has been removed, you can now apply spackle. After it dries, lightly sand the ceiling. Finish by priming your ceiling with the paint primer you choose.
Close
Commercial Popcorn Ceiling Removal
Inform employees and occupants about asbestos. Asbestos exposure can pose a severe risk to your health. This risk exists only if the material is disturbed. Do contact certified asbestos inspectors. They can also take samples from materials that could contain asbestos. Asbestos laboratories can test the material and determine if it has asbestos.
Bring with you an asbestos inspector’s written assessment detailing the exact location. This document should describe the extent of damage and any maintenance or approval recommendations.
Do hire an asbestos abatement contractor. This will help avoid conflicts of interest. It is recommended to hire a different contractor from the one who collected the samples. This allows you to have a balance of contractors to get the best results.
Close
Residential Painting
To perform the job, a contractor or painting service must have a certificate of clearance. A valid license and insurance are also required for contractors. All workers employed by the contractor must have proper insurance. In the event of an injury, the worker will be responsible for paying your wages.
To ensure that your work is complete and without any problems or penalties in the future, it is crucial to verify the insurance and clearance details of the contractor. Before hiring a contractor to do exterior or interior painting, ensure they have liability insurance.
Close
Commercial Painting
You can check out his current projects and just completed projects. You should not visit another site to see his work. You can also get information from his previous clients about the painting contractor. It is vital to ensure that you hire a contractor who has completed similar projects in the same timeframe and within the budget.
Materials used
Paint and other supplies such as paint should be high quality and popular brands. Choosing a contractor that uses high-quality paints and supplies is crucial. You must hire a contractor who uses environmentally friendly paints. The contractor’s paints should be water-based and dry quickly to minimize the smell.
To help you choose the required contractor for exterior and interior painting, consider other factors such as security measures followed by the contractor, estimated budget, time taken, and flexibility. It is vital to include these factors in your checklist.
Close
Knockdown Textures
Prepare the space.
Lay a tarp on the ground and remove all furniture. To protect yourself from overspray, remove wall-mounted light fixtures and hangings. Apply masking tape to electrical covers, baseboards, and wall or ceiling joints.
Smoothen the surface.
You can apply knockdown texture to painted or bare drywall, provided the surface is free of blemishes. Protective gloves and goggles are required to prepare the surface. Then, apply the spackling material to any cracks or divots. Follow the instructions on the packaging to dry the compound. Next, sand the surface with fine-grit paper.
Assemble your gun.
Attach the hopper (basin) to the top of your drywall hopper gun. Next, attach the gun assembly and the air hose to your air compressor. For knockdown textures, connect the spray nozzle to your gun. A nozzle measuring 8-12 millimeters will work best.
Close
Orange Peel Ceiling
After you have prepped your room and made the perfect batch of mud for spraying on your splatter texture – it’s time to start streaming!
It would help if you filled the hopper with mud. Then, put on a dust mask. Mud can get in the air as you work.
If you are interested in options other than the Wagner Tex spray, I don’t recommend this sprayer unless they have an air compressor or a texture gun/hopper. Let’s face it; you probably have used texture sprayer before, so you don’t need to read this.
Amazon has a Wagner Spray Tex.
Use the Wagner Power Tex sprayer’s smallest hole nozzle. A smaller hole will result in smaller droplets. This is what you want for your splatter texture.
Spraying should be done approximately 3 feet from the surface. You won’t stop spraying once you have pulled the trigger. Keep moving in an even space while overlapping roughly 50% each pass.
Close
Smooth Ceiling Finish
Hiring Boca Raton Popcorn Ceiling Removal & Drywall Repair Group to do the job makes more sense than trying to do it yourself. Let’s look at your options.
What should you choose: Textured or smooth?
This is a difficult one. We have prepared some navigation tips to help you make the right decision. You will be able to make a decision much more accessible.
Appearance
There is a difference in the appearances of the two finishes. If they are beautifully finished, smooth ceilings will have a polished, clean appearance. It would help to consider that they have no visible seams.
There are many styles and types of textured ceilings. You can choose from orange peel textures, popcorn, and knockdown.
Close
Drywall Repair
After the spackle dries, you’ll need to sand off all the ridges before applying the next coat. Make sure the ceiling is as smooth as possible. You can also use screws to your advantage. Use a little spackle to coat the knife’s end.
Apply the spackle to three or four screws at a time. It would help if you held the knife at an angle relative to the drywall. Pull the knife along all four screw heads in a straight line. This will fill in any screw head voids and leave a trace of spackle on the drywall between the screws. This will save labor and your arm, as you can only do four screws simultaneously. The slight trace of spackle that remains on the drywall will conceal the locations of the screw heads later.
Close
Drywall Installation
A roll of spackle tape, possibly a six-inch or two-inch spackle taping knife, and a ladder will all be carried. Even this smaller tub can get heavy as the day progresses. The base coat of spackle should be applied very heavily and measure approximately five to six inches wide. Place your paper tape directly on top of the joint.
Use the six-inch knife to pull the knife along your paper tape, pressing it into the spackle. The tape should have a spackle on both ends. If the job is done correctly, the tape and spackle will be wet.
Please don’t pull the knife too hard to remove all spackle. Leave the tape dry. The spackle should be used to cover the tape with a thin layer of spackle. Make sure the spackle is as smooth as possible. Don’t leave any ridges or bumps.
If you are located in Palm Beach County and you don’t see your city/area listed above, don’t worry! We cover all of Palm Beach County. Fill out the contact form above or CLICK HERE and send us a message. We’ll get back to you asap!